HHI Neck Rake Builders Kit
HHI now offers a weld-on replacement neck section for bagger/touring models. This piece provides correct frame geometry for installing a 23″, 26″, or 30″ wheel when installed with our FL raked triple trees. Trees are available in machine or black anodized finish. We provide this as a kit with our trees and correct extensions / inserts for the applications listed in the options below. Other parts mentioned below are sold separatley.
Trees work with all 1987 and up Bagger/ touring models with standard late model ignition location.
Builders Kit Features
• Mounting holes are present in our neck kit for the mounting bolts to attach the Fairing bracket on Roadglide models.
• The frame neck rake kit weld on piece adds 9 degrees on the 26″ and 30″ kit, 7 degrees on the 23″ kit.
(Factory Frame Rake= 26 degrees)
• Factory Triple Tree rake is 4 degrees. Our trees are a 12 degrees over stock for the 30″ kit, 9 degrees over stock for the 26″ kit and, 7 degrees over stock on the 23″ kit for a total of 7 degrees.
• This kit can be installed with the motor in the frame (well protected during welding & painting of course). However, it doesn’t take much more to pull the motor allowing a full color match paint job on the frame.
• Using our kit the neck is extended 1.5” forward and 1” up on both the 30″ and 26″ kit. (The 23″ kit extends 1″ forward and 1″ up.)
• The total resultant rake using our neck rake builders kit is 40 degrees for a 23″ wheel, 44 degrees for a 26″ wheel, and 47 degrees for a 30″ wheel.
• The resultant trail will provide proper handling at both low and hi speed.
•A couple of other things to note for Roadglide models: The inner fairing mounting bracket will have to be modified & extended to allow adequate clearance for the triple trees. In addition the engine guard will need to be replaced by a custom lower fairing support bracket. We can help you with both of these items. If you have any other questions let us know.
Our neck Rake Builders Kit contains Triple Trees and weld-in piece only.
The chart below provides the entire list of required parts needed to convert Roadglide, Streetglide, Ultra Classic, and Roadking models from stock wheel to a 23″ ,26″, or 30″ wheel. Parts numbers and links to these parts are provided as well.These parts are sold separately.
23″ Wheel | 26″ Wheel | 30″ Wheel | |
Neck Rake Builders Kit(ships with proper length extension / insert | 2008 and Earlier (NRBK 7-7-08)2009 and Up (NRBK 7-7-09)Standard insert / Extension | 2008 and Earlier (NRBK 9-9-08+1)2009 and Up (NRBK 9-9-09+1)+1″ insert / extension | 2008 and Earlier (NRBK 9-12-08+2)2009 and Up (NRBK 9-12-09+2)+2″ insert / extension |
Fork Tubes | Stock | Stock | Stock |
Fork Covers | Stock | +2 Extended Covers part # FTC-X02 | +4 Extended Covers (special order, please call) |
Fender | 23″ Wrap Around Fender(WTFF-23FLH) | 26″ Wrap Around Fender(WTFF-26FLH) | 30″ Wrap Around Fender(WTFF-30FLH) |
Fender Spacer Kit | Wrap Around Fender FSK-C06 | Wrap Around Fender FSK-C04 | Wrap Around Fender FSK-C04 |
Raked Headlight Bucket(Fits all models except Roadglide) | StandardVisor | StandardVisor | Not available for 30″ wheel |
Inner Fairing Mount(Roadglide Only) | BUY | BUY | BUY |
Engine Guard Eliminator(Roadglide Only) | BUY | BUY | BUY |